Simultaneous determination of N-butylscopolamine and oxazepam in pharmaceutical formulations by first-order digital derivative spectrophotometry

A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20 degrees and 80 degrees C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 x 10(-7) to 8.0 x 10(-5) mol/L for N-butylscopolamine and 7.1 x 10(-8) to 8.0 x 10(-5) mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).     

Stability and thermodynamic parameters of thiopyrimidines, 2-thioxanthine and their complexes with Zn(II) and Cd(II)

The thermodynamic protonation constants of 4-amino-1,6-dihydro-2-methylthio-5-nitroso-6-oxo-pyrimidine (MTH), 4-amino-5-nitroso-6-oxo-1,2,3,6,-tetrahydro-2-thiopyrimidine (TANH) and 2-thioxanthine (TXH) in aqueous media at 25, 30, 40 and 50 ± 0.1°C, have been determined potentiometrically by Bjerrum and Robinson's methods. The ionic strength was maintained constant by using 0.1 M NaNO₃ as the supporting electrolyte.The stability constants and thermodynamic functions for Zn(II) and Cd(II) complexes of MTH and TXH, at different ionic strengths and temperatures, have been calculated.     

Analytical procedures for quantification of peptides in pharmaceutical research by liquid chromatography–mass spectrometry

Peptide quantification by liquid chromatography–mass spectrometry (LC–MS) combines the high resolving power of reversed-phase (RP) chromatography with the excellent selectivity and sensitivity of mass spectrometric detection. On the basis of comprehensive practical experience in the analysis of small molecules, pharmaceutical research is developing technologies for analysis of a growing number of peptidic drug candidates. This article is a detailed review of procedures based on LC–MS techniques for quantitative determination of peptides. With the focus on pharmaceutical applications several technologies for sample preparation, various aspects of peptide chromatography, important characteristics of ESI–MS, selectivity of MS-detection modes, the large variability of internal standards, and modern instrumentation are discussed. The demand for reliable, robust, sensitive, and accurate methods is discussed using numerous examples from the literature, complemented by experiments and results from our laboratory.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

7-Benz[c] acridinemethanols as tetracyclic analogs of the 2-phenyl-4-quinolinemethanol antimalarials

A series of new 7-benz[c]acridinemethanols and 5,6-dihydro-7-benz[c]acridinemethanols was prepared as rigid, tetracyclic analogs of the antimalarial 2-phenyl-4-quinolinemethanols. Condensation of 5,7-dichloroisatin with 6-chloro-, 7-chloro-, and 6,7-dichloro-1-tetralone furnished halogenated 5,6-dihydro-7-benz[c]acridinecarboxylic acids, which were transformed into the corresponding acid chlorides, acyl malonates, α-bromomethyl ketones, and epoxides. Fully aromatic members of the series obtained via dehydrogenation of the 5,6-dihydro acids were likewise converted into epoxides via the acylmalonate route. Although all the epoxides studied proved to be exceptionally resistant to ring-opening by di-n-butylamine, probably on account of steric effects, they could be cleaved readily with piperidine or morpholine. Nmr spectra of the resulting amino alcohols suggest that these compounds exist in a single preferred conformation stabilized by internal O-H····N hydrogen bonding, and that free rotation about the side chain C-C bond does not occur at room temperature.     

Neutral pi-associated porphyrin [2]catenanes

A series of neutral porphyrin-containing catenanes has been synthesised, consisting of a zinc porphyrin strapped by a polyethylene glycol chain containing four or six ethylenoxy-units and incorporating a central naphthoquinol unit, interlinked with a naphthalene diimide macrocycle. The napthalene diimide precursor units exhibit only weak binding with the strapped porphyrins (Ka between 8 and 0.02 M(-1)), but good yields of the catenanes were obtained by Glaser coupling of the alkynyl napthalene diimide precursors in the presence of the porphyrins. Structures and solution conformations were determined by mass spectral and detailed 1H NMR studies. For the longer strapped porphyrins, the diimide macrocycle rotates around the central naphthoquinol unit at 420-450 times per second, while rotation is virtually prevented in the tighter strapped derivatives. A second dynamic process occurring in both sets of catenanes and described as 'yawing' leads to inequivalence in the naphthalene moieties. UV-Visible spectra indicate charge transfer interactions and electronic communication between the two components of the catenane.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.     

Circular‐Dichroism Studies on Artemisinin and Epiartemisinin and Their β‐Cyclodextrin Complexes in Solution

The circular dichroism (CD) spectra of the powerful antimalarian active principle artemisinin (ART; 1 ) from Artemisia annua, and of epiartemisinin (EPI, 2), its C(7) epimer, were studied in solution in the presence and absence of β‐cyclodextrin (β‐cd). A significant inversion of sign in the region of the second electronic transition was detected. The rotational strengths were successfully calculated within the time‐dependent density functional theory (DFT), which enabled us to establish a correlation between the molecular recognition and the biological acitivities of the two isomers.     

Analysis of free fatty acids and fatty acid phenacyl esters in vegetable oils and margarine by capillary electrochromatography

Capillary electrochromatography (CEC) has been utilized to analyze free fatty acids (FFAs) and fatty acid phenacyl esters (FAPEs) originating from vegetable oils and margarine. The analyses were performed on capillaries 25 and 40 cm long, 100 microm ID, and packed with 3 microm Hypersil ODS. Isocratic elution was achieved with the mobile phase acetonitrile/50 mM 2-(N-morpholino)ethane sulfonic acid (MES), pH 6, at a ratio of 9:1. For quantitative analysis, the formation of FAPE derivatives is preferred. Moreover, the number of double bonds in the FAPEs can be elucidated by measuring the UV absorbance ratio of 240:210 nm. For the determination of the oleate/elaidate ratio in margarines, the FFAs are analyzed because of overlap of elaidate/palmitate in FAPE analysis. Data obtained with CEC and micro liquid chromatography (LC) were compared and CEC was found to be far superior in terms of efficiency and speed of analysis. Important selectivity differences were noted between micro LC on highly endcapped ODS and CEC on the silanol-rich Hypersil ODS.